View Single Post
Old October 6, 2012, 08:58 AM   #7
Bob Wright
Senior Member
 
Join Date: July 10, 2012
Location: Memphis, Tennessee
Posts: 1,852
JimPage wrote:

Quote:
Bob: I would suspect the difference is caused by a difference in the gap between the cylinder face and the forcing cone of the barrel between the two pistols.
Sorry, I don't buy that. That being the case, all loads should have similar results. They don't. Only certain powders exhibited that result. H110, for example, showed significant increase with the longer barrel.

Bob Wright
Bob Wright is offline  
 
Page generated in 0.04157 seconds with 7 queries