View Single Post
Old October 5, 2012, 08:21 AM   #4
hooligan1
Senior Member
 
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 3,257
Listen, when you removed the "hexhead" bolt from behind the handle you have to let the firing pin down into the fired position to get to the "hexhead" bolt,,, when you reassemble it make sure to Recock the bolt before installing it into the rifle.!
__________________
Thanks for coming!
hooligan1 is offline  
 
Page generated in 0.04161 seconds with 7 queries