View Single Post
Old September 19, 2012, 09:11 PM   #20
jimbob86
Senior Member
 
Join Date: October 4, 2007
Location: All the way to NEBRASKA
Posts: 6,874
Just make sure the stock is free of all wax and oil before you try putting Poly to it ..... and abrade between coats with very fine (180+ grit)sandpaper ..... or your very shiny coat of poly will flake and peel.


-Jim the Wood Floor Guy
__________________
TheGolden Rule of Tool Use: "If you don't know what you are doing, DON'T."

http://nefirearm.com/
jimbob86 is offline  
 
Page generated in 0.03979 seconds with 7 queries