View Single Post
Old August 17, 2012, 09:56 AM   #4
ThisIsMySig
Member
 
Join Date: June 6, 2012
Location: Apache Junction, Arizona
Posts: 65
I was a little nervous about that load being so close to the bullet.

That W296 load came from http://www.reloadammo.com/32hr-mag.htm, which he says is a very good load. The problem with all his load data and for the most part all other data I have seen is that he does not list a seating depth. He even lists a larger load of 10.3 gr of W296. That would probably be a compressed charge.

That same chart lists a charge of between 10.1 and 10.9 gr of W296 for a 100 gr LRN. Although these bullets are not seated as deeply, that load kind of makes me nervous as well.

Frankenmauser, you said "Other than Titegroup, those powders should get you in the ballpark of 700-750 fps with 2.5-3.0 gr". Will the TG be faster or slower?
__________________
Sig P250 in 9mm and .45 cal, Sig 1911 .22LR, Heritage Arms 32 H&R Magnum revolver, S&W Governor.
Reloading 9mm, 32 magnum, 45 ACP, 45 LC and 410 bore brass.

NRA Member
ThisIsMySig is offline  
 
Page generated in 0.04282 seconds with 7 queries