View Single Post
Old August 16, 2012, 11:59 PM   #1
ThisIsMySig
Member
 
Join Date: June 6, 2012
Location: Apache Junction, Arizona
Posts: 65
32 H&R Magnum Seating Depth

Got a supply of 83 grain Berry's DEWC and HBWC bullets. I loaded a few of each using 2.1 grains of Titegroup and seated them nearly flush.

I want to load some using 9.5 grains of W296. Seating the bullets nearly flush will bring the bottom of the bullet real close to the charge. Not touching, but real close. After doing quite a bit of research, I can't find the proper seating depth for these bullets at this load. No one seems to list it.

I did come across one picture of a 32 Mag with a reverse seated HBWC which looks to seated at about 1.250.

Anyone have any experience with this load/bullet combination?
__________________
Sig P250 in 9mm and .45 cal, Sig 1911 .22LR, Heritage Arms 32 H&R Magnum revolver, S&W Governor.
Reloading 9mm, 32 magnum, 45 ACP, 45 LC and 410 bore brass.

NRA Member
ThisIsMySig is offline  
 
Page generated in 0.04321 seconds with 7 queries