View Single Post
Old June 25, 2012, 08:33 PM   #2
Salmoneye
Senior Member
 
Join Date: December 31, 2011
Location: Vermont
Posts: 1,338
I have a Redding #14000 that works well, but...

I've come to prefer my Lee for speed and ease:

You buy the cutter and lock stud, and then the case guide/length gauge and shell holders are purchased for each caliber...

http://leeprecision.com/case-conditi...rimming-tools/

With theRedding I have to set the length manually, and mic every so often...

With the Lee, the length stays the same with each batch of brass that are the same manufacturer...Different brass will change length slightly depending on internal dimensions near the flash hole...The Redding will keep the same OAL no matter what the internal space is on different lots/manufacturers of brass...

Six of one, half dozen of the other...
Salmoneye is offline  
 
Page generated in 0.04593 seconds with 7 queries