View Single Post
Old June 18, 2012, 01:22 PM   #4
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,221
CFE223 is a new powder and hasn't had time to work its way into general load data, so Hodgdon is going to be your data source for now. For the 40 grain Varmageddon use the Hodgdon data for the 40 grain Nosler Ballistic Tip. Just be sure you don't skip beginning with the starting load and working up in no more than 2% increments toward the listed maximum while watching for pressure signs. For the 55 grain Varmageddon, follow the same approach using the Hodgdon data for the 55 grain Speer Spire Point.

If you are looking for accuracy loads, you'll want to use even smaller steps, like 0.2 grain steps.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member

Last edited by Unclenick; June 19, 2012 at 11:31 AM. Reason: typo fix
Unclenick is offline  
 
Page generated in 0.05062 seconds with 7 queries