The Firing Line Forums - View Single Post

Kog73 · June 14, 2012, 01:56 PM

Yes, don't fully load a brass one and stick to a low load, otherwise the cylinder will push back and `stretch` the frame. I personally use 13/13.5 grains on my 1858 `buffalo` and that does me fine for 25 yards

June 14, 2012, 01:56 PM	#3
Kog73 Junior Member Join Date: June 13, 2012 Posts: 10	Yes, don't fully load a brass one and stick to a low load, otherwise the cylinder will push back and `stretch` the frame. I personally use 13/13.5 grains on my 1858 `buffalo` and that does me fine for 25 yards