View Single Post
Old June 1, 2012, 01:40 PM   #11
FordV8
Member
 
Join Date: February 17, 2011
Location: Southern USA
Posts: 22
David

Thanks so much! That is excellent info.

When talking with my 'smith and SOT dealer, he mentioned the same thing.

So I measured, post near baffle strike though!

.50 inches of threads on the barrel before thread relief shim and .45 inches after shim.

The suppressor has about .60 inches of thread. I'll need to keep those threads clean inside the can.

Thanks again David.
FordV8 is offline  
 
Page generated in 0.04969 seconds with 7 queries