View Single Post
Old May 25, 2012, 12:16 PM   #9
noelf2
Senior Member
 
Join Date: April 14, 2008
Location: Stafford, VA
Posts: 1,698
So my hammer pauses just before the bolt leg drops off that hammer cam. Is the angle on one side of the hammer cam to allow the bolt leg to slip around it easily when the hammer is falling? Maybe the cam isn't angled enough or there's a burr keeping the bolt leg from slipping around the cam. I'll check for burrs around the bolt leg and hammer cam tonight, and compare with my other remmys.
__________________
Liberty and freedom often offends those who understand neither.

Last edited by noelf2; May 25, 2012 at 12:24 PM.
noelf2 is offline  
 
Page generated in 0.04476 seconds with 7 queries