View Single Post
Old May 12, 2012, 02:14 PM   #1
afolsomb17
Junior Member
 
Join Date: February 17, 2012
Posts: 3
Stuck fast pre-64 M70 Barrel

I have a question and hope there is some one who could help me. My problem is I cant unloosen the barrel of this m70 that I am going to blue. I have tried using the wheeler engineering vice barre woodl blocks in a 20 ton hydraulic jack as my barrel vice. I'm using also the proper barrel wrench. The problem is I've managed to destroy the blocks with the jack, I have used heat to the point I'm afraid I will color the steel. I soaked the receiver for 48+ hours in PB Blaster and the only thing I managed to do was spin the action and barrel around in the resin packed blocks. So does anyone have a suggestion. I really need to get these two pieces apart for bluing since the barrel will be glossy finish and the receiver matte
afolsomb17 is offline  
 
Page generated in 0.04415 seconds with 7 queries