View Single Post
Old April 3, 2012, 05:50 PM   #11
Hardy
Senior Member
 
Join Date: August 6, 2009
Location: South Carolina
Posts: 635
One thing I didn't do. I took off trigger guard and cleaned out inside of frame without taking out all springs with ballestol using pipe cleaners,swabs and q tips. I never had this problem before. I soaked nipples in wd 40 then cleaned them out w/pipe cleaner and guitar string. I'm pretty sure I cleaned out cylder wedge hole. I also put a fine touch of pure ballestol on exposed springs and wiped everything. I cleaned cylinder chambers and barrel w/ballestol. The next day I picked up gun and saw the red oozing around cylinder and pin and the pin was rusted. I cleaned it w/tooth brush and swabs and put another coat of that CVA lube. Next day brown rust again. I took hoppes anti corrosive and that did it. So that's what I did.

WBH
Hardy is offline  
 
Page generated in 0.05307 seconds with 7 queries