View Single Post
Old April 2, 2012, 08:10 PM   #2
Bill DeShivs
Senior Member
Join Date: April 7, 2006
Posts: 7,773
I make mine out of a 2 X 4. Mark your spaces and cut holes with a Forstner bit, then bandsaw from the edge to the holes. Stand on the 2" side, and place your guns in it. Simple, cheap, and the bare wood won't hurt the finish.
Bill DeShivs, Master Cutler
Bill DeShivs is offline  
Page generated in 0.03875 seconds with 7 queries