The Firing Line Forums - View Single Post

Old 454 · March 14, 2012, 07:40 PM

after reading all winter long about reloading I will be using SNS casting's bullets.

here is there advertisment of the mix and BHN.

Our alloy is factory mix of 92% lead 6% Antimony 2% Tin. All bullets are lubed and sized and ready to load!!

They state that there BHN is about 17

I will be reloading 45acp and 357 mag. and I will be using titegroup powder.

Will these bullets be ok for the powder type I am using or is there a bettor powder to use for both calibers

thanks

March 14, 2012, 07:40 PM	#1
Old 454 Senior Member Join Date: August 15, 2011 Location: Chesterton Ind. Posts: 215	SNS Casting after reading all winter long about reloading I will be using SNS casting's bullets. here is there advertisment of the mix and BHN. Our alloy is factory mix of 92% lead 6% Antimony 2% Tin. All bullets are lubed and sized and ready to load!! They state that there BHN is about 17 I will be reloading 45acp and 357 mag. and I will be using titegroup powder. Will these bullets be ok for the powder type I am using or is there a bettor powder to use for both calibers thanks Last edited by Old 454; March 14, 2012 at 10:01 PM.