View Single Post
Old February 1, 2012, 07:15 PM   #4
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,074
The magazine follower could be binding, or the action screws are loose and allowing the magazine spring to get between the magazine box and the stock. But NOTE, please. If you remove the stock on that gun, be very careful in reassembly. If the magazine sping does slip between the magazine box and the stock, tightening the action screws will crack the stock.


Jim
__________________
Jim K
James K is offline  
 
Page generated in 0.04704 seconds with 7 queries