View Single Post
Old August 28, 2011, 03:14 PM   #2
Join Date: March 4, 2005
Location: Ohio
Posts: 11,376
Cartridge brass density is 8.53 gm/cc, according to Matweb. That means 0.853 grains, in identically trimmed and primer pocket uniformed cases, will represent 0.1 grains difference in powder space. Since pressure goes up exponentially with increase in powder charge, this is about like a 0.05 grain charge difference. Not usually a significant error. If you charge cases ±0.1 grains, then figure cases ±1.7 grains are roughly equivalent to that.
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is offline  
Page generated in 0.03536 seconds with 7 queries