View Single Post
Old June 24, 2011, 09:42 AM   #10
carsinc
Member
 
Join Date: March 10, 2011
Posts: 64
Brass Cleaning

Here's how I clean my brass:

Load the vibrator with brass (with primer) and media (I buy bags of corn cob media at the pet store. They sell it as bird cage litter)
Add one laundry dryer sheet, cut in 1" strips
Add about 1" squeeze of Flitz (tube type)
Add about 1" ball of Never-Dull wadding, pulled into small pieces

In the photo below, the 45 ACP brass on the left was tumbled about one hour using the above method. I didn't cherry pick a case, but just picked out one at random. The case on the right was tumbled by another shooter using the same vibrator, corn cob media (probably from Midway) and a reloading polish additive.

__________________
Not All Who Wander Are Lost
carsinc is offline  
 
Page generated in 0.04824 seconds with 7 queries