View Single Post
Old April 2, 2011, 08:55 AM   #4
steve4102
Senior Member
 
Join Date: December 23, 2005
Location: Minnesota
Posts: 2,243
Take the ones that do not chamber. Screw the sizing die into the press a little at a time and resize until they chamber.

OR-Take the ones that do chamber and fire them. Measure the case with your Hornady gauge. Set the fl die to bump the shoulder back .002 with these fire formed cases.
steve4102 is offline  
 
Page generated in 0.04122 seconds with 7 queries