View Single Post
Old January 26, 2011, 02:28 PM   #35
junkman_01
Junior member
 
Join Date: November 9, 2010
Location: Florida
Posts: 260
The original Colt design for the 1873 firing pin was as you have shown, with a cross pin. No need to fabricate and harden one. Just purchase a pin from the manufacturer and install it. Then open the hole in the frame to accommodate it. Of course you would also need to get a center-fire cylinder.
junkman_01 is offline  
 
Page generated in 0.04631 seconds with 7 queries