View Single Post
Old January 3, 2011, 11:19 PM   #5
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,325
Use an extender to reach through the action. Take it very slowly and use lots of cutting oil. After a few times, you get a feel for when you are getting close, but on a one-time job, just take it slow, make a turn, flush, use the GO gauge, do another turn, etc. Tedious.

Jim
__________________
Jim K
James K is offline  
 
Page generated in 0.04638 seconds with 7 queries