View Single Post
Old April 15, 2010, 08:36 PM   #18
brickeyee
Senior Member
 
Join Date: December 29, 2004
Posts: 3,342
And the most PITA pin is the ejector retaining pin.

It is very small, and normally an interference fit with the leg of the ejector.

Start it out with a short solid punch, switch to a longer one (Brownells sells ones with replaceable tips) when you have enough to hold the small punch tip captive in the hole.
brickeyee is offline  
 
Page generated in 0.04322 seconds with 7 queries