View Single Post
Old March 9, 2010, 08:38 PM   #12
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,427
The EZ-Out works on auto screws/bolts but they generally are a lot bigger than the tiny 6x48 base screws. There are EZ-Outs made that small, but they do break easily. (Voice of experience here.) In my experience, if tricks like heating or freezing don't work, drilling with a minor diameter drill is the best route. Then you pick out the threads or use a 6x48 tap to clean up.

Jim
__________________
Jim K
James K is offline  
 
Page generated in 0.04921 seconds with 7 queries