View Single Post
Old October 12, 2009, 12:55 PM   #2
zukiphile
Senior Member
 
Join Date: December 13, 2005
Posts: 1,655
Quote:
(And yes, the marred frame is from me getting frustrated and rammy while trying to pry the mainspring housing free - really ****** me off at myself for letting my impatience mark up the polymer frame.)
The 22/45 is designed to so thoroughly mimick the .45 experience that it lets you mar the frame the first time you re-assemble it.

Take it apart and try again, making sure that the hammer strut is resting in the little detent above the mainspring. You should get stiff resistance only when the mainspring housing is about an eighth of an inch from flush with the frame.
zukiphile is offline  
 
Page generated in 0.04366 seconds with 7 queries