View Single Post
Old September 7, 2008, 02:28 PM   #4
Tom-C
Member
 
Join Date: July 25, 2008
Posts: 45
Tarus 941 trigger

That is what I was asking, to see if anyone had experience with the mainspring on the Tarus and how far I can go. The sear and hammer were fairly straight forward and that (with some reduction of the trigger return spring) got me the good single action pull.

Do the springs in the Brownells Pro-Spring pak 969-301-510AB fit a Tarus 941?

Thanks
Tom-C is offline  
 
Page generated in 0.04173 seconds with 7 queries