View Single Post
Old August 17, 2008, 11:25 AM   #5
James K
Join Date: March 17, 1999
Posts: 22,066
FWIW, by the time you notice that vibration, the bullet is halfway to the target.

You may have to drive that firing pin off the cocking piece. With the firing unit out of the bolt and the retaining cross pin removed, clamp the cocking piece in a padded vise, clamp the front of the firing pin with vise grips and tap on the pliers.

Jim K
James K is offline  
Page generated in 0.03239 seconds with 7 queries