Thread: old 22 Sauer
View Single Post
Old July 28, 2008, 01:11 PM   #4
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,456
If there is a hole in the ratchet, it is probably for a pin to keep the ratchet from turning. If it looks like a pin in there would serve the purpose, I would use it and not bother trying to drill another hole. A pin should not need to be hardened if it is only to keep the ratchet from turning - a piece of a nail should do the trick.

Jim
__________________
Jim K
James K is offline  
 
Page generated in 0.05690 seconds with 7 queries