View Single Post
Old July 16, 2008, 02:22 PM   #4
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,170
Measure the barrel-cylinder gap using a feeler gauge (auto stores have them). If it is less than .003", your cylinder is binding when it warms up. If that is the case, have a good gunsmith take a tad off the rear of the barrel (using a tool made for that, not a file) or return the gun to S&W.

Jim
__________________
Jim K
James K is offline  
 
Page generated in 0.04262 seconds with 7 queries