Thread: Caps not firing
View Single Post
Old December 7, 2007, 01:40 PM   #6
Pahoo
Senior Member
 
Join Date: February 16, 2006
Location: IOWA
Posts: 5,633
Your pietta should require #10 primers and do not recommend you switching to #11's unless you replace the #10 nipples with #11 nipples. A tight fit on nipples is very important and should be tight to reduce the possibility of chain firing. In the end, you may have to replace the nipples anyway asnd some of my problems went away when I switched to a good S.S. #10 nipples. You should want to have a spare set anyway. Size and primers were not as much an issue as quility of nipples. Don't give up on the #10 primers and try both till you are satisfied.
Pahoo is offline  
 
Page generated in 0.05253 seconds with 7 queries