View Single Post
Old September 7, 2006, 12:01 PM   #159
180pilot
Junior Member
 
Join Date: December 20, 2004
Posts: 10
cheaper 12 gage bullet for brass shells

Idea:

Cheap Lee foster slug mold 7/8 oz. ($18 with handles), machine off the inside form, so bullet is solid, and about 750 grs. then pour with harder linotype lead. With the .682 diameter, it's designed for a standard trap wad cup for the sabot. So, I don't know about how it will crimp in brass yet, as the Magtechs inside are about a 11ga wad size. I suppose I can just cut the wad cup off to hold bullet, and use 11 ga. Circle Fly nitro cards and wads. Then tight crimp against the plastic cup with bullet protruding.

Last edited by 180pilot; September 7, 2006 at 12:20 PM. Reason: change in information
180pilot is offline  
 
Page generated in 0.04628 seconds with 7 queries