View Single Post
Old February 2, 2006, 10:29 AM   #43
jlyent
Member
 
Join Date: June 19, 2005
Posts: 53
190 trigger & reassembly

dbct,i bent the trigger spring on my 190 and it lightened to 3.5 lbs. on the stock bolt problem, if you install the stud first you can position the metal clip (recoil plate is what winchester calls it) in the proper spot. the instructions claim stock removal is not recomended in normal disassembly, however i find the easy way to install th bolt spring & guide is with the stock off. you insert bolt spring& guide from rear, compess spring, hold in place with metal ruler & slide stock on. jim y
jlyent is offline  
 
Page generated in 0.04150 seconds with 7 queries