Thread: Dry Firing
View Single Post
Old May 16, 1999, 01:56 PM   #3
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,654
Snap caps are easily made. Get some nylon rod a little over primer diameter, trim enough to force into the primer pocket of a fired and de-primed case, and cut off flush. If you want to make a dummy round, go through all the reloading steps except the powder loading and priming. Insert the nylon as above.

Jim
James K is offline  
 
Page generated in 0.04046 seconds with 7 queries