View Single Post
Old March 2, 1999, 03:29 PM   #2
Gun Plumber
Member
 
Join Date: February 20, 1999
Posts: 44
Sounds like the bottom lugs on the barrel are not fitted properly. I had this happen with a Caspian frame once. I had to cut the bottom barrel lugs further back to make the slide flush with the frame. But mine was only off by about .025 thousands.

[This message has been edited by Gun Plumber (edited March 02, 1999).]
Gun Plumber is offline  
 
Page generated in 0.04902 seconds with 7 queries