View Single Post
Old February 22, 2005, 10:02 PM   #2
CaseyC
Member
 
Join Date: November 29, 2004
Posts: 19
Yes, it is reasonable and to be expected. Many of the more recent reloading manuals state that the best accuracy will probably be longer that the stated maximum OAL. Using a Stoney Point comparator will help to measure the cartridge accurately also. And..using your own fired case in the OAL gage is--most of the time--the most accurate method to find your chamber demensions and set up your sizing die.

Casey
CaseyC is offline  
 
Page generated in 0.04199 seconds with 7 queries