PDA

View Full Version : 1911 style spare parts.


boogalou1
January 7, 2002, 10:51 AM
For you guys that work on 1911 colts, clones, or copies, what spare parts should I buy in case something breaks on my Star and/or Ballester Molina pistols. Thanks in advance.

4V50 Gary
January 7, 2002, 03:12 PM
Mainspring. Sear. Firing pin & firing pin spring. Extractor. Plunger & recoil spring. Those are the basics for the 1911. Anybody else got suggestions?

James K
January 7, 2002, 06:14 PM
It won't break, but may get lost, so a spare safety spring and plunger for the B-M is a good idea. (This is the plunger and spring that go inside the hammer pin under the safety; they have a habit of popping out when the safety is removed.) Since there is no comparable part on the U.S. Colt type, so you will have to order one specifically for the B-M. Otherwise, 4V50 Gary has it about right.

Jim

Jim V
January 7, 2002, 07:30 PM
Ok, where does one find spare parts for a B/M anyway? There are not many 1911 parts that will work in a B/M, even the grips are different.

boogalou1
January 7, 2002, 10:51 PM
Some parts for the B/M are at www.globaltrades.com/pdf.htm.
Also, Gun Parts has the B/M extractor, part # 730820.