PDA

View Full Version : adding extended mag on 870


zauer
October 5, 2001, 02:32 PM
Hi Folks,

If I opt to add the tac star extended mag on an 870, is it possible to convert it back to it's original set up for hunting (meeting the 3 load max.) My guess is no, as you pretty much need to drill the dimples out of the magazine tube...am I correct? And, If this is right, do they obviously sell extended mag plugs to meet the hunting regulations on shot capacity. Thanks in advance folks.

Joe

Benjamin
October 5, 2001, 03:25 PM
Yes, you can easily convert it back to the normal mag tube.

All you do is:

Remove extension

Remove spring and follower

Replace original length spring and follower

Add plug, if required

Put original mag cap on.

---------------------------------------- That's it

I know of no plugs for an extended tube, but you could make one up rather easily with a piece of dowell.

MH
October 5, 2001, 04:55 PM
Brownells sells an extended plug that you can trim to whatever length you want.