View Full Version : HELP!
October 5, 2012, 02:04 PM
I'm having difficulties getting my Remington Model 1100 semi-auto shotgun to let me pull the bolt back again it appears as if the hammer, something else are blocking it and I don't know how to get them down. A picture is included.
October 5, 2012, 04:03 PM
I would suggest you punch out the two dimpled crosspins, set into the lower edge of the receiver, one each, toward the front/rear of the side.
They are of slightly different size, so you know which home each belongs in.
Once they're "out", the trigger group (triggerguard housing with the firing & feed mechanism) should be able to be removed out of the bottom of the receiver with zero parts flying free.
Try cocking the hammer, and/or firing it via the trigger, manually while it's out of the receiver - and mayhaps you can see if there's any foreign matter in there, gumming up the works.
In any event, it's a good chance to flush out the firing group with a cleaner, and lightly re-lube the parts, before re-installing it back into the receiver.
October 6, 2012, 06:29 AM
She needs some oil...shes a little dry bud.
vBulletin® v3.8.7, Copyright ©2000-2014, vBulletin Solutions, Inc.