PDA

View Full Version : Savage 64f bolt assembly problem.


PettyofficerDarn
July 4, 2012, 12:14 AM
Hey all been awhile but I'm currently back in Oregon from my station in Florida. I went shooting at brown's and it was really dirty. I cleaned up after myself and others just to help out. But my main question is my Savage 64f (.22lr) kept jamming and just not firing shell would load and the trigger would pull but no strike. I came home and disassembled it and in the video I watched to do it he said that the "striker guide rod" ,is the best way to describe what it is, he stated that it was machine pressed into the bolt assem. wasn't supposed to move but upon cleaning mine it came out with out any pulling or force it fell loose. I pushed it back in but it came right back out. Is there anything I can do my self. I didnt want to use a rubber mallet yet before consulting others with more experience.

Sorry for the run on but it needed to be a little long winded and detailed to explain what the problem is.

Thanks

Petty Officer Darneille, USN.

Scorch
July 4, 2012, 03:24 AM
You can buy the entire bolt assembly from Numrich for $47.85 + shipping and handling.

PettyofficerDarn
July 4, 2012, 03:46 PM
not really looking to do that right now, financially obligated for other activities. was looking more for a DIY home fix.