PDA

View Full Version : Anyone familiar with Chrome lining?


Rugerismisticness
December 3, 2011, 08:48 AM
One of my Chrome lined barrels in my Benelli Cordoba has a few oddities at the muzzle end opposite the ports. It looks almost like pitting from rust, but closer examination definitly disproves this. I was thinking it might have been a defect from the chrome lining process??? The gun shoots great, I'm just curious.

olddrum1
December 4, 2011, 12:56 AM
Possibly it could be melted plastic from the wad.

Rugerismisticness
December 4, 2011, 09:42 AM
I thought so too, but I really scrubbed the area, it's certainly little dibbits in the metal. I also had the idea that (being opposite the ports in the barrel) they could be side effects of cutting the ports with the EDM process.

zippy13
December 4, 2011, 01:03 PM
Are you certain the chrome isn't starting to lift? Typically, if chrome fails it's most likely at the corners (muzzle and port openings).

Rugerismisticness
December 4, 2011, 06:24 PM
I could imagine that happening as well, but this is opposite where the ports are (if you through the porting and shine a light down the muzzle, there is some noticable/deep and erattic pitting, but I'm fairly sure it isn't from rust). Oh well, I guess as long as it shoots well I'm ok.:confused::)

zippy13
December 4, 2011, 08:28 PM
Keep an eye on your chrome irregularities, if they start to grow, contact Benelli.

Rugerismisticness
December 5, 2011, 05:08 AM
Yeah, the gun has less than 3500 rounds on it. I think it'l all be fine.:o