PDA

View Full Version : Changing forearms on 870


CincyLawman
November 18, 2000, 06:30 PM
Can anyone help me here. Picked up new wood forearm for my 870. Now I need to figure out how to remove the synthetic arm from the rails....Thanks in advance.

BUCKSHOT
November 18, 2000, 07:40 PM
You will need a fore end wrench. You can obtain one through Remington, or Brownell's. It costs about $30-$40.

old hawk
November 19, 2000, 07:32 AM
i made one by simply taking a piece of water pipe and hack
sawing the two sides to get the notches that fit in the lock ring,i then chased them down to fit with a file,drill a hole on the top to slip a piece of bar thru to twist it with as well.theyre not screwed on that tight and it worked ,saved myself the $$ in ten minutes work for a one shot deal of changing them once.

Dave McC
November 19, 2000, 08:45 AM
I use a set of needlenosed pliers to change a couple of forends. Open them up, insert the tips in the notches and twist.

Gary H
November 19, 2000, 12:27 PM
Changed mine without special tools.