PDA

View Full Version : Ranger 12ga Shotgun Parts


Sgt.K
March 1, 2000, 04:41 PM
Hello,

I have an old 12ga side-by-side hammerless shotgun with dual triggers.

On the left side of the receiver is
"Ranger" on the right side "PAT.APR.20-1915". The serial number is 99845G, the barrel has this same number, less the G. The top of the left barrel is marked "12 GAUGE".

I need the cocking mechanism that goes into a fixture on the underside of barrel. It also operates the extractor.

Also any information (manufacture, etc.) about this firearm would be appreciated.

Thanks.

Sgt.K

[This message has been edited by Sgt.K (edited March 01, 2000).]

Harley Nolden
March 2, 2000, 08:11 AM
Sgt K:
Your shotgun
Ranger 400 Stevens 311
Hammerless double barrel, double triggers
Made from 1982 to 1989.

You can get parts from Numerich (Gun Parts) of West Hurley NY 912-679-2417.

HJN

[This message has been edited by Harley Nolden (edited March 02, 2000).]

Sgt.K
March 2, 2000, 05:24 PM
Thank you for the information.

I probably should have mentioned I inherited this sometime in the mid-70's.

However, I will check with Numerich.

Thanks again.

Sgt.K

fal308
March 3, 2000, 09:14 AM
There was a Ranger brand name used by Sears, Roebuck & Co. from about 1930 to WWII on shotguns made for them by Stevens Arms Co. in two models same as Model 315 and Model 215.
As per[ b]Side by Sides of the World[/b] by Charles E. Carder

[This message has been edited by fal308 (edited March 03, 2000).]