View Full Version : extra barrel for Pardner Pump 20 gauge?
February 19, 2011, 11:14 AM
Does anyone know what barrels are interchangeable with the Pardner Pump 20gauge? I have a 21" barrel that came stock with the shotgun, but I am looking for a 26 or 28" smoothbore that I could use for clays. Does anyone know what manufacturer has barrels that would work for this, or does H&R make their own replacement barrels? Thanks for the help.
February 20, 2011, 03:20 AM
H&R has there own barrels. http://www.hr1871.com/Support/accessoryProgram.asp It lists a 28" vant rib for the 20 gauge with a screw in modified choke for just $85.
February 20, 2011, 04:28 AM
"...does H&R make their own replacement barrels?..." The Barrel Accessory Program is about the single shot Pardner.
I'm not seeing extra barrels for the Chinese made pump gun anywhere on H&R's site. You'd best call 'em and ask. Phone: (866) 776-9292
Or contact one of these guys.
February 20, 2011, 08:43 PM
I have heard some people say that since it is a replica of the Remington 870 that the barrels are interchangable, but seeing as 870 barrels run for around 150 + dollars and the pardner pump only costs 159 at walmart, I would say I should just buy a new parder pump instead. I was just hoping that this isnt true, and that there is a cheaper alternative out there.
February 20, 2011, 10:31 PM
Yes call H&R. I didn't realize that those barrels were only for the single shot pardner and not the protector, but see post #10 of this thread. http://thefiringline.com/forums/showthread.php?t=318211
February 20, 2011, 10:43 PM
I don't know about putting an 870 barrel on the H&R Protector, but some have got them to work on antoher Chinese 870, the Hawk/Interstate 982, clone by making an adapter. The problem with the 982 was that the barrel matched up with the receiver and bolt, but the barrel guide ring on the 870 barrels was a few inches nearer its breech than was the one on a 982 barrel. Consequently, tightening the mag cap did nothing to tighten the breech against the receiver.
Some solved the issue by cutting a piece of pipe with an inside diameter just larger than the outside diamater of the magazine tube and slipping it over the magazine after sliding the barrel in place.
I believe if you google the internet you may find something specific to the pardner protector.
For example see http://www.thehighroad.org/archive/index.php/t-534082.html That part about them being on back order suggests that there are H&R barrels to be bought.
This guy max100 seems to have gotten into some trouble with filling orders for extension mags, but does seem to know the 870 clones.
I would borrow someone's 870 barrel to fit on your protector before buying one. If it fits, good luck. I would not make a spacer out of pvc like someone elsse did and posted pics on the internet.
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.