PDA

View Full Version : WIN MOD 70 Magazine Spring


Hoskins
January 4, 2011, 01:05 AM
I've looked & looked for a place that sells a Winchester Model 70 30.06 magazine spring & I can't find a single place. I didn't know where else to turn to except here. Below I will describe my problem & see if the magazine spring is the actual problem, any help would be greatly appreciated.

I have Winchester Model 70 Westener in 30.06. The problem is that last round in the magazine just pops up & out of the magazine well...off of the follower. It comes off as I put forward pressure on the rim of the round as soon as I begin pushing the bolt forward.

A person on this site said that it could be either the magazine spring or the feed rails. See just as long as there is a round ungerneath the round that is currently being chambered all is good, but on the last round it just pops out & on top of the magazine well & can't be chambered.

Thanks in advance for all who helps me out.

Scorch
January 4, 2011, 03:49 AM
Here you go.
Parts 61 & 62
http://www.gunpartscorp.com/catalog/Products.aspx?catid=7496

Hoskins
January 4, 2011, 09:18 AM
Thanks brother