PDA

View Full Version : NEED a flat hammer spring


Trapshooterx
January 4, 2010, 06:56 PM
I need a flat hammer spring for a Marlin 1894 lever action in 32-20. It is real old and takes the flat hammer spring. Mine broke in half :barf: I tried Numrich, Brownells and Midway. Any ideas?

kraigwy
January 4, 2010, 07:18 PM
Brownells sells flat sping material, It sounds like you are gonna have to make one.

Dfariswheel
January 4, 2010, 07:39 PM
Wisner's has them listed for straight or pistol grip versions:

http://www.wisnersinc.com/rifles/marlin/cfleveraction.htm

Bill DeShivs
January 4, 2010, 09:03 PM
If the above doesn't work, I can make one if you send the old pieces.

Trapshooterx
January 4, 2010, 09:28 PM
Great link thank you

Jbar4Ranch
January 5, 2010, 11:32 AM
Had one break in my vintage .38-40 Marlin '94 last year and modified an 1866/1873 main spring to fit. They're available from various sources for $12 - $15, and are long enough to be cut to length, and the screw hole has to be enlarged just a tad. It took all of maybe thirty minutes.

Trapshooterx
January 5, 2010, 12:12 PM
I got one on its way from Wisners. Thanks guys!