PDA

View Full Version : I want to put a suppressor on my taurus 92


gadgetguy1288
March 18, 2009, 08:44 PM
But i have a few questions,

1) where do i go about getting a threaded barrel for it?

2) what cans would you recommend for it? does anyone on here have a canned pt92?

3) does anyone make a 9mm flash suppressor that would be able to thread on to the barrel when im not using the can?


Any other info is always appreciated. :D

Randy

David Hineline
March 19, 2009, 01:01 AM
Most just get the short bit of the factory barrel that protrudes threaded 1/2X28. Threaded barrels would be available for purchase from barrel manuf.

The beretta/taurus is one of the pistols that can operate with a non boostered silencer, but it will also work with a booster, so buying a booster silencer will give you more options in mounting it onto other pistols.

MGRacer
March 23, 2009, 09:08 PM
It is likely you will need higher sights: one option (I used them) is http://www.millettsights.com/controller.php

You can thread the stock barrel -- I did at first then went to a slightly longer barrel threaded from: http://www.jarvis-custom.com/

Picture:

http://i16.photobucket.com/albums/b25/Racer351/PT92AFSWRPC-K2.jpg

I use either the updated SWR PC-K2 or an AAC Evolution 9 on the gun. It works with either booster or not.

Edit: You can bore a larger hole in the AR-15 (.223) flash suppressor since it has 1/2x28 threads .. just be careful you do not confuse a small hole one with your larger hole thread protector for the pistol.

anthonydr2
April 10, 2009, 11:35 PM
Trident from SWR works well on Taurus 92 and 99. It is also full auto rated.