PDA

View Full Version : Taurus 85/605 How to Change Trigger Return


SweetKnuckles
March 5, 2009, 05:37 PM
Using a Wolff Kit, I just changed out my mainspring.

Would love any information on how to change out the trigger return spring.

Can't seem to find any good instructions anywhere.

Would be great if I could just change it out without having to remove the hammer and all those other scary parts!

Thanks!

--Knuckles

ECHOONE
March 6, 2009, 01:05 AM
I did mine awhile back,you don't have to remove the hammer,it's hard to explain with out taking mine apart to look at it's been so long,it was a long cylindr piece about 2 inches the spring rides in/on and slides onto the back of the trigger,but the hammer doesnt come out nor does the triggerthe spring actually rides between the hammer and the spring,If I remember correctly there is a very thin metal piece that engages into the back of the trigger under spring pressure be careful of that it can break very easy if you dont line it upi carefully behind the trigger because you arent going to be able to buy parts for it if you do,you'll be shipping it to Taurus!

SweetKnuckles
March 6, 2009, 10:59 AM
Thanks for the tips.

To anyone else interested who finds this thread, I found a good tutorial at TaurusArmed.net in their revolver section. Seems to be the only one on the net, ANYWHERE.

Guy took pics and everything. Looks like a real bugger though.