PDA

View Full Version : Sticky Accutrigger!!!


ELMOUSMC
April 22, 2008, 10:18 PM
Help! The accutrigger on my model 40 Savage has developed a problem it is a single shot and today after chambering a round and closing the bolt the accutrigger wouldn't work.I would lift the bolt and then the accutrigger would engage.I have cleaned it carefully and applied remoil sparingly but the problem continues any ideas ELMOUSMC

bcavin
April 22, 2008, 10:23 PM
Master Gunz,

I don't know much about accutriggers (nothing at all really) but that sounds like a part defect a gun smith might want to look at. you might be able to get it replaced for free from manufacturer.

ELMOUSMC
April 22, 2008, 11:01 PM
I was thinking that exact same thing,the only thing I haven't tried is adjusting the trigger let of a little I have it set as low as it will go and that may be the problem.Semper Fi ELMOUSMC

Hawg Haggen
April 23, 2008, 06:00 AM
Could be binding on something. Might want to check stock clearance. Does it work with the action out of the stock?

Alleykat
April 23, 2008, 10:21 PM
Increase the trigger pull slightly and see what happens.

ELMOUSMC
April 23, 2008, 11:19 PM
Thanks for the wisdom guys,I had the trigger set to light and that kept it from engauging properly a 1/4 turn fixed it thanks again ELMOUSMC