PDA

View Full Version : Mossberg 500 Sights Help


Rfd245
February 8, 2008, 12:04 AM
I am looking to upgrade my sights for a Mossberg 500.

I had hoped to go with a ghost ring site, but am unable to find a front sight that does not have to be silver soldered.

I have the 18.5in barrel.

Is there a manufacturer that makes an 18.5 barrel with the rifle sight already on it?

Or, any reccomendations for a front sight that can be banded or screwed into my current barrel?

Any help is appreciated thank you.

Rob96
February 8, 2008, 04:32 AM
It seems the best bet is getting the front soldered on. The barrel is to thin to drill and tap. Get the ghost rings from Mossberg, the rear you can attach on you rown. It should only run about $75 to get the front done.

Desert01
February 8, 2008, 06:59 AM
http://www.precisionsalesintl.com/bar11rd4-new.JPG

I have two shotguns set up with these LPA sights. If you reciever is tapped you can put on a rail and get a nice set of these that ride on the rail.

Rob96
February 8, 2008, 07:11 AM
Desert01 where did you purchase those?

Desert01
February 8, 2008, 09:27 AM
You can get them from Brownell's or Presision Sales International(the importer)