PDA

View Full Version : Please help identify winchester pump 22


deano6772
April 17, 2007, 09:23 PM
I have a small winchester .22 cal rifle pump action and have no idea what type it is or how old it is. All I can tell you is that the barrel is about 19 3/8 inches long, and round. It has a large screw on the left side that lets you take it apart. The overall lenth is 36". It has a adjustable site on the barrel and a linemans site behind the hammer. It has the # 661228 on the pieace of steel that extends into the stock and the same # at the edge where the barrel conects with the gun with the letter "B" under it. The stock has checkering wehre you put your had when fireing the gun. Any help would be greatly appreciated.
Thank you
Deano6772

Mike Irwin
April 17, 2007, 11:31 PM
There's nothing stamped on the top of the barrel?

The large screw sounds like it is a Model 90, but it should have numerous markings on the barrel.

deano6772
April 18, 2007, 06:35 AM
Hi Mike,
There is nothing on the barrel any wear that I can see.

Mike Irwin
April 18, 2007, 09:10 AM
Is it marked Winchester on the gun anywhere?

It should be unless it's a foreign copy.

Any chance of posting some pictures?

deano6772
April 18, 2007, 10:06 AM
Yes it says winchester under the linemans site and on the butt of the stock. I have one pic but it probaly isnt that great. If you want I can email it to you. My email add is deano6772@hotmail.com

James K
April 18, 2007, 10:31 AM
Based on the serial number and a round 20" barrel, I think it is the Model 1906. AFAIK, the Model 1890 was not made with a round barrel, and those were the only two Winchester pump guns that went that reached that number. If it is a Model 1906, it was made in 1928.

Jim