View Full Version : Help with O ring on 1100
November 22, 2006, 10:10 AM
I live in Bolivia and there are no O rings specific made for the 1100 so I need the size, thickness and diameter info, to buy it from an ordinary O ring company. I just bought the shotgun and the o ring was missing. :eek:
I forgot to mention it is a 12gauge
Thanks in advance;)
November 22, 2006, 06:51 PM
I looked through my stock of O-rings, had the 20, 28, and .410 O-rings, but not one for the 12ga, I think my 11-87 has a slightly different size anyway. The size is allthe same on the ones I have with about 1/16", and whatever fits over your mag tube. Try to get hight temperature O-rings if possible. I'm sure someone will come up with the exact measurements before too long.
November 22, 2006, 07:23 PM
Try #13 on this site:
I'm sure there are others, cheeper too.
November 23, 2006, 09:56 AM
Many times you can find "O" rings that will work in a local hardware store too. The are not Remington's, but they work.
November 23, 2006, 07:29 PM
I got the following from shotgunworld.com
o-rings for the 12 ga. 1100/11-87 shotguns
#021 is the viton size(same as factory made)
. #33 is the size for plain old neoprene rubber plumber's
o-rings. I get them at home depot, and they are the same size
as Ulysses suggests...15/16" by 1-1/16" by 1/16" thick. I know
the Viton o-rings are rated for higher temps, but I have had
total success with the plain rubber ones, with no
deterioration whatsoever. I bought 6 of the cheapies thinking
they would burn up quickly, but I am on my first one still
with 1,000 shells through it and it still looks new.
If anyone can remember who original wrote this please give
them credit for it!
November 26, 2006, 08:33 PM
you can maybe order direct from remmington on the web.
vBulletin® v3.8.7, Copyright ©2000-2016, vBulletin Solutions, Inc.