PDA

View Full Version : zipper scratches on chrome slide


clarence
July 2, 2000, 11:12 PM
Would appreciate any help/suggestions on how to reduce or remove zipper sratches on my pistols chrome slide . Hope you guys could help me! Thanks in advance.

PreserveFreedom
July 2, 2000, 11:18 PM
Never had that problem but I would try some paste style chrome wheel polish.

beherethen
July 2, 2000, 11:32 PM
I suggest you consult with a jeweler first. Having said that, what I would do is sand with 400 to 1000 grit-reversing direction with each increase. Hope this helps-good luck

Mal H
July 3, 2000, 09:43 AM
Since this is more of a gunsmithing issue, I'll move this to the Smithy forum...

blades67
July 4, 2000, 11:37 PM
Exactly how are you holstering that pistol? ;)

------------------
Guns cause crime like spoons cause Rosie O'Donnell to be fat!

I hunt, therefore I am.

[This message has been edited by blades67 (edited July 05, 2000).]

George Stringer
July 5, 2000, 05:08 AM
Clarence, you might be able to polish them out depending on how deep they are. If they have penetrated to the steel the only way to get rid of them is to have the slide chromed again. George